zOs/REXX/LOGG
/* rexx
nur start - end time und retries ausgeben
*/
call errReset 'h'
if arg() = 0 then
call logg A540769.tmp.logg, 'zeile eins', 'zeile zwei'
else
call logg A540769.tmp.logg, arg(1)
exit
/*--- append a message to a seq DS if available
otherwise isssue a message ----------------------------*/
logg: procedure expose m.
parse arg dsn
o.1 = ''
do x=1 to arg()-1
o.x = ' ' strip(arg(x+1), t)
end
x = max(1, arg() - 1)
call dsnAllocWait "dd(logg) mod '"dsn"'",,,55
o.1 = date(s) time() strip(o.1) '*'rt
address tso 'execio' x 'diskw logg (stem o. finis)'
if rc <> 0 then
say 'execio logg rc' rc dsn
call sleep 0 , 1
address tso 'free dd(logg)'
say 'after free rc=' rc date(s) time() dsn
if rc <> 0 then
say 'logg free rc' rc
return
endProcedure logg
loggOld: procedure expose m.
parse arg dsn
o.1 = ''
do x=1 to arg()-1
o.x = ' ' strip(arg(x+1), t)
end
x = max(1, arg() - 1)
do rt=0
say 'before' rt 'alloc' date(s) time() dsn
x.1 = ''
x.2 = ''
x.3 = ''
call outtrap x., '*'
address tso "alloc dd(logg) mod dsn('"dsn"') MGMTCLAS(COM#A092)"
alRc = rc
call outtrap off
say 'after alloc rc=' rc date(s) time() dsn
if rc = 0 then
leave
if rt > 100 then
return err('timeout allocating logg' dsn 'rc' alRc time(),
'\n'x.1'\n'x.2'\n'x.3)
if pos('DATA SET IS ALLOCATED TO ANOTHER', x.1 x.2 x.3) < 1 then
return err('rc' alRc 'allocating' dsn'\n'x.1'\n'x.2'\n'x.3)
call sleep 1
end
o.1 = date(s) time() strip(o.1) '*'rt
address tso 'execio' x 'diskw logg (stem o. finis)'
if rc <> 0 then
say 'execio logg rc' rc dsn
call sleep 0 , 1
address tso 'free dd(logg)'
say 'after free rc=' rc date(s) time() dsn
if rc <> 0 then
say 'logg free rc' rc
return
endProcedure logg
/* rexx */
parse arg s
if s = '' then
call sleep 5
else
call sleep s
exit
sleep: procedure expose m.
parse arg secs, sayIt
if sayit <> 0 then
say 'sleeping' secs 'secs' time()
CALL SYSCALLS 'ON'
ADDRESS SYSCALL "sleep" secs
CALL SYSCALLS 'OFF'
if sayit <> 0 then
say 'slept' secs 'secs' time()
return
endProcedure sleep
/* copy sleep begin ***************************************************/
sleep: procedure expose m.
parse arg secs, sayIt
if sayit <> 0 then
say 'sleeping' secs 'secs' time()
CALL SYSCALLS 'ON'
ADDRESS SYSCALL "sleep" secs
CALL SYSCALLS 'OFF'
if sayit <> 0 then
say 'slept' secs 'secs' time()
return
endProcedure sleep
/* copy sleep end *****************************************************/
/* copy adrTso begin *************************************************/
/*--- send ggTsoCmd to tso, fail if rc <> 0 or not listed in ggRet ---*/
adrTso:
parse arg ggTsoCmd, ggRet
address tso ggTsoCmd
if rc == 0 then return 0
else if ggRet == '*' then return rc
else if wordPos(rc, ggRet) > 0 then return rc
else
call err 'adrTso rc' rc 'for' ggTsoCmd
return /* end adrTso */
/*--- format dsn from tso format to jcl format -----------------------*/
dsn2jcl: procedure expose m.
parse upper arg dsn ., addPrefix
if left(dsn,1) = "'" then
return strip(dsn, 'b', "'")
sp = sysvar('SYSPREF')
if sp == '' then
sp = userid()
cx = pos('~', dsn)
if cx < 1 & addPrefix == 1 then
return sp'.'dsn
do while cx \== 0
le = left(dsn, cx-1)
ri = substr(dsn, cx+1)
if right(le, 1) == '.' | left(ri, 1) == '.' then
dsn = le || sp || ri
else
dsn = le || left('.', le \== '') || sp ,
|| left('.', ri \== '') || ri
cx = pos('~', spec, cx)
end
return dsn
endProcedure dsn2Jcl
/*--- format dsn from jcl format to tso format -----------------------*/
jcl2dsn: procedure expose m.
parse arg dsn .
return "'"dsn"'"
endProcedure jcl2dsn
dsnSetMbr: procedure expose m.
parse arg dsn, mbr
bx = pos('(', dsn)
if bx > 0 then
dsn = strip(left(dsn, bx-1))
if mbr <> '' then
dsn = dsn'('strip(mbr)')'
return dsn
endProcedure dsnSetMbr
dsnGetMbr: procedure expose m.
parse arg dsn
lx = pos('(', dsn)
rx = pos(')', dsn, lx+1)
if lx < 1 then
return ''
else if lx < rx then
return substr(dsn, lx+1, rx-lx-1)
else
return strip(substr(dsn,lx+1))
endProcedure dsnGetMbr
/**********************************************************************
io: read or write a dataset with the following callsequences:
read: readDDBegin, readDD*, readDDEnd
write: writeBegin, writeDD*, writeEnd
readDD returns true if data read, false at eof
***********************************************************************/
/*--- prepare reading from a DD --------------------------------------*/
readDDBegin: procedure expose m.
return /* end readDDBegin */
/*--- read from DD ggDD into ggSt, return false at eof ---------------*/
readDD:
parse arg ggDD, ggSt, ggCnt
if ggCnt = '' then
ggCnt = 100
call adrTso 'execio' ggCnt 'diskr' ggDD '(stem' ggSt')', 2
return (value(ggSt'0') > 0)
return /* end readDD */
/*--- finish reading DD ggDD ----------------------------------------*/
readDDEnd: procedure expose m.
parse arg ggDD
call adrTso 'execio 0 diskr' ggDD '(finis)'
return /* end readDDEnd */
/*--- prepare writing to DD ggDD -------------------------------------*/
writeDDBegin: procedure expose m.
parse arg ggDD
/* ensure file is erased, if no records are written */
call adrTso 'execio' 0 'diskw' ggDD '(open)'
return /* end writeDDBegin */
/*--- write to gg ggDD from stem ggSt, ggCnt records -----------------*/
writeDD:
parse arg ggDD, ggSt, ggCnt
if ggCnt == '' then
ggCnt = value(ggst'0')
call adrTso 'execio' ggCnt 'diskw' ggDD '(stem' ggSt')'
return
endSubroutine writeDD
/*--- end writing to dd ggDD (close) --------------------------------*/
writeDDEnd: procedure expose m.
parse arg ggDD
call adrTso 'execio 0 diskw' ggDD '(finis)'
return /* end writeDDEnd */
/*--- standardise a dsn spec
word1 dsName or -
word2 dd or -
word3 disp or -
word4 to first : attributes in tso format
after first : attributes for new allocation
----------------------------------------------------------------------*/
dsnSpec: procedure expose m.
parse upper arg spec
rr = '' /* put leading - in separate words */
do sx=1 while words(rr) < 3 & wx \= ''
wx = word(spec, sx)
do while abbrev(wx, '-') & words(rr) < 3
wx = substr(wx, 2)
rr = rr '-'
end
rr = rr wx
end
spec = rr subWord(spec, sx)
na = ''
dd = ''
di = ''
if left(spec, 1) = '&' then /* external spec is handled ok */
spec = strip(substr(spec, 2))
do wx=1 by 1
w = word(spec, wx)
if w = '' | abbrev(w, '.') | abbrev(w, ':') then
leave
else if wordPos(w, 'OLD SHR MOD NEW')>0 | abbrev(w, 'SYSO') then
di = w
else if w = 'CATALOG' then
di = di'+'w
else if abbrev(w, 'DD(') then
dd = substr(w, 4, length(w)-4)
else if abbrev(w, 'DSN(') then
na = strip(substr(w, 5, length(w)-5))
else if na == '' then
na = dsn2jcl(w)
else if dd == '' then
dd = w
else if di == '' then
di = w
else
leave
end
if na == '' then na = '-'
if dd == '' then dd = '-'
if di == '' then di = '-'
re = subword(spec, wx)
if abbrev(re, '.') then
re = substr(re, 2)
return na dd di re
endProcedure dsnSpec
/*--- alloc a dsn with dsnAlloc
if the dsn is inuse wait and retry
until either the allocation is successfull
or the timeout occurs --------------------------------------*/
dsnAllocWait: procedure expose m.
parse upper arg spec, pDi, pDD, timeOut
x = max(1, arg() - 1)
do rt=0
m.adrTsoAl.1 = ''
m.adrTsoAl.2 = ''
m.adrTsoAl.3 = ''
call outtrap m.adrTsoAl.
res = dsnAlloc(spec, pDi, pDD, '*')
call outtrap off
if \ abbrev(res, ' ') then
return res
msg = m.adrTsoAl.1'\n'm.adrTsoAl.2'\n'm.adrTsoAl.3
if rt > timeOut & timeOut \== '' then
return err('timeout allocating' spec time() '\n'msg)
if pos('DATA SET IS ALLOCATED TO ANOTHER', msg) < 1 then
return err('allocating' spec'\n'msg)
say time() 'sleep and retry alloc' spec
call sleep 1, 0
end
endProcedure dsnAllocWait
/*--- alloc a dsn or a dd
spec '-'<ddName>
datasetName? disposition? '.'? attributes? (':' newAtts)?
disp default disposition
dd default dd name
retRc erlaubte ReturnCodes (leer = 0)
returns if ok then ddName <rexx for free> otherwise rc -----*/
dsnAlloc: procedure expose m.
parse upper arg spec, pDi, pDD, retRc
parse value dsnSpec(spec) with na dd di rest
if na = '-' then
m.dsnAlloc.dsn = ''
else
m.dsnAlloc.dsn = na
if na == '-' & dd \== '-' & di == '-' & rest = '' then
return dd
if dd == '-' & pDD \== '' then
dd = pDD
if dd == '-' then do
if symbol('m.adrTso.ddNum') = 'VAR' then
dd = m.adrTso.ddNum + 1
else
dd = 1
m.adrTso.ddNum = dd
dd = 'DD' || dd
end
if di = '-' & pDi \== '' then
di = pDi
if di = '-' then
di = 'SHR'
else if pos('(', na) < 1 then
nop
else if di = 'MOD' then
call err 'disp mod for' na
else
di = 'SHR'
if pos('/', ds) > 0 then
return csmAlloc(na dd di rest, retRc)
else
return tsoAlloc(na dd di rest, retRc)
endProcedure dsnAlloc
tsoAlloc: procedure expose m.
parse arg na dd disp rest ':' nn, retRc
c = 'alloc dd('dd')' disp
if na \== '-' then
c = c "DSN('"na"')"
alRc = adrTso(c rest, '*')
if alRc = 0 then
return dd 'call adrTso "free dd('dd')";'
if nn \= '' & wordPos(disp, 'OLD SHR') > 0 ,
& sysDsn("'"m.dsnAlloc.dsn"'") == 'DATASET NOT FOUND' then do
say 'tsoAlloc rc' alRc 'for' c rest '...trying to create'
call adrTso 'alloc dd('dd') new catalog' dsnCreateAtts(na, nn)
call adrTso 'free dd('dd')'
return tsoAlloc(na dd disp rest, retRc)
end
if retRc = '*' | wordPos(alRc, retRc) > 0 then
return ' ' alRc
call err 'tsoAlloc rc' alRc 'for' c rest
endProcedure tsoAlloc
dsnCreateAtts: procedure expose m.
parse arg dsn, atts, forCsm
bl = 32760
if abbrev(atts, ':') then do
rl = substr(atts, 3)
if abbrev(atts, ':F') then do
if rl = '' then
rl = 80
recfm='f b'
bl = bl - (bl // rl)
end
else do
if rl = '' then
rl = bl-4
recfm = substr(atts, 2, 1) 'B'
end
end
if pos('(', dsn) > 0 then
po = 'dsntype(library) dsorg(po)'
else
po = ''
dsn = dsnSetMbr(dsn)
if forCsm == 1 then
return "dataset('"dsn"')" po,
"recfm("space(recfm, 0)") lrecl("rl") blkSize("bl")" ,
"mgmtclas(COM#A091) space(10, 1000) cylinder"
else
return "dsn('"dsn"')" po,
"recfm("recfm") lrecl("rl") block("bl")" ,
"mgmtclas(COM#A091) space(10, 1000) cyl"
endProcedure dsnCreateAtts
/*--- read the dataset specified in ggDsnSpec to stem ggSt -----------*/
readDSN:
parse arg ggDsnSpec, ggSt
ggAlloc = dsnAlloc(ggDsnSpec, 'SHR', 'readDsN')
call adrTso 'execio * diskr' word(ggAlloc, 1) '(stem' ggSt' finis)'
interpret subword(ggAlloc, 2)
return
endSubroutine readDsn
/*--- write the dataset specified in ggDsnSpec from stem ggSt
write ggCnt records if not empty otherwise ggst0
if ggSay 1 then say ... records written to ... -------------*/
writeDSN:
parse arg ggDsnSpec, ggSt, ggCnt, ggSay
if ggCnt == '' then
ggCnt = value(ggst'0')
ggAlloc = dsnAlloc(ggDsnSpec, 'OLD', 'readDsN')
call adrTso 'execio' ggCnt 'diskw' word(ggAlloc, 1) ,
'(stem' ggSt 'open finis)'
interpret subword(ggAlloc, 2)
if ggSay == 1 | m.debug == 1 then
say ggCnt 'records written to' ggDsnSpec
return
endSubroutine writeDsn
copyDSN: procedure expose m.
parse arg frSpec, toSpec, ggSay
frDD = dsnAlloc(frSpec, 'SHR', 'FRDD')
toDD = dsnAlloc(toSpec, 'OLD', 'TODD')
call readDDBegin word(frDD, 1)
call writeDDBegin word(toDD, 1)
cnt = 0
do while readDD(word(frDD, 1), r.)
call writeDD word(toDD, 1), r.
cnt = cnt + r.0
end
call readDDEnd word(frDD, 1)
call writeDDEnd word(toDD, 1)
interpret ';' subword(frDD, 2) '; ; ;' subword(toDD, 2)
if ggSay == 1 | m.debug == 1 then
say cnt 'records copied from' frSpec 'to' to toSpec
return
endSubroutine writeDsn
/* copy adrTso end ****************************************************/
/* copy err begin ******************************************************
messages, errorhandling,help
***********************************************************************/
/* configure err -----------------------------------------------------*/
errReset: procedure expose m.
parse arg m.err.opt, ha
if pos('I', translate(m.err.opt)) > 0 then
if sysVar('sysISPF') = 'ACTIVE' then
call adrIsp 'control errors return'
if ha == '' then
drop m.err.handler
else
m.err.handler = ha
return
endSubroutine errReset
/*--- error routine: abend with message ------------------------------*/
err:
parse arg ggTxt, ggOpt
drop err handler opt call return
if ggOpt == '' & symbol('m.err.handler') == 'VAR' then do
if 1 then do /* no detection of recursive err call loop
--> will anyway fail by stack overflow */
interpret m.err.handler
end
else do
/* avoid recursive err call loop */
drop call return
if symbol('m.err.call') \== 'VAR' then
m.err.call = 1
else
m.err.call = m.err.call + 1
if m.err.call > 10 then do
say 'errHandler loop:' m.err.handler
end
else do
m.err.return = 1
call errCallHandler m.err.handler
m.err.call = m.err.call - 1
if m.err.return then
return result
end
end
end
call outDest
call errSay ggTxt, 'e'
if ggOpt == '' & symbol('m.err.opt') == 'VAR' then
ggOpt = value('m.err.opt')
ggOpt = translate(ggOpt)
if pos('T', ggOpt) > 0 then do
trace ?r
say 'trace ?r in err'
end
if pos('H', ggOpt) > 0 then do
call errSay 'divide by zero to show stackHistory', 'e'
x = 1 / 0
end
call errSay 'exit(12)', 'e'
exit errSetRc(12)
endSubroutine err
errCallHandler:
parse arg code
interpret code
m.err.return = 0
return
endProcedure errCallHandler
/*--- assert that the passed rexx expression evaluates to true -------*/
assert:
interpret 'assertRes =' arg(1)
if \ assertRes then
call err 'assert failed' arg(1)':' arg(2)
return
endProcedure assert
/*--- output an errorMessage msg with pref pref
split message in lines at '/n' ---------------------------*/
errSay: procedure expose m.
parse arg msg, pref
parse source . . ggS3 . /* current rexx */
if pref == 'e' then
msg = 'fatal error in' ggS3':' msg
else if pref == 'w' then
msg = 'warning in' ggS3':' msg
else if pref \== '' then
msg = pref':' msg
return outLn(msg)
endProcedure errSay
/*--- abend with Message after displaying help -----------------------*/
errHelp: procedure expose m.
parse arg msg, op
call errSay msg, 'e'
call help
call err msg, op
endProcedure errHelp
/*--- return the Operating System we are running on: TSO or LINUX ---*/
errOS: procedure expose m.
parse source os .
return os
endProcedure errOS
/*--- set rc for ispf: -------------------------------------------------
if a cmd is run by ispStart, its RC is ignored,
but ISPF passes the value of the shared varible 3IspfRc
back as return code
----------------------------------------------------------------------*/
errSetRc: procedure expose m.
parse arg zIspfRc
if errOS() \== 'LINUX' then
if sysVar('sysISPF') = 'ACTIVE' then
address ispExec vput 'zIspfRc' shared
return zIspfRc
endProcedure errSetRc
/*--- output a trace message if m.tr is set -----------------------*/
trc: procedure expose m.
parse arg msg
if m.trace == 1 then
call out 'trc:' msg
return
endProcedure trc
debug: procedure expose m.
parse arg msg
if m.debug == 1 then
call out 'debug' msg
return
endProcedure debug
/*--- return current time and cpu usage ------------------------------*/
timing: procedure expose m.
return return time() 'ela='time('E') 'cpu='sysvar('syscpu'),
'su='sysvar('syssrv')
timingTest: procedure expose m.
say 'begin' timing() sysvar('sysnode')
do 30000000
end
say 'end ' timing()
return
/*--- display the first comment block of the source as help ----------*/
help: procedure expose m.
parse source . . s3 .
call out right(' help for rexx' s3, 79, '*')
do lx=1 by 1
if pos('/*', sourceLine(lx)) > 0 then
leave
else if lx > 10 then do
call out 'initial commentblock not found for help'
return
end
end
do lx=lx+1 by 1
li = strip(sourceLine(lx), 't', ' ')
if pos('*/', li) > 0 then
leave
call out li
end
call out right(' end help for rexx' s3, 79, '*')
return 4
endProcedure help
/*--- output a message to the current destination -------------------*/
out: procedure expose m.
parse arg msg
if symbol('m.err.out') \== 'VAR' then
call outDest
interpret m.err.out
return 0
endProcedure out
/*--- output all lines (separated by '\n') of all args --------------*/
outLn: procedure expose m.
do ax=1 to max(1, arg())
msg = arg(ax)
sx = 0
bx = -1
do lx=1 until bx >= length(msg)
ex = pos('\n', msg, bx+2)
if ex < 1 then
ex = length(msg)+1
call out substr(msg, bx+2, ex-bx-2)
bx = ex
end
end
return 0
endProcedure outLn
/*--- set and return some frequent destinations for out -------------*/
outDest: procedure expose m.
parse arg ty, a
if ty == '' | symbol('m.err.out') \== 'VAR' then
m.err.out = 'say msg'
if ty == 's' then
m.err.out = 'st='quote(a)';sx=m.st.0+1;m.st.0=sx;m.st.sx=msg'
else if ty == 'i' then
m.err.out = a
else if \ abbrev('=', ty) then
call err 'bad type in outDes('ty',' a')'
return m.err.out
endProcedure outDest
/*--- quote string txt using quoteChar qu ("""" ==> ") ---------------*/
quote: procedure expose m.
parse arg txt, qu
if qu = '' then
qu = '"'
res = qu
ix = 1
do forever
qx = pos(qu, txt, ix)
if qx = 0 then
return res || substr(txt, ix) || qu
res = res || substr(txt, ix, qx-ix) || qu || qu
ix = qx + length(qu)
end
endProcedure quote
/*--- if function ----------------------------------------------------*/
if: procedure expose m.
parse arg co, ifTrue, ifFalse
if co then
return ifTrue
else
return ifFalse
endProcedure if
/* copy err end *****************************************************/